Wally&Sue

Illinois 116 Round Barn museum Rochester Indiana. Not many of these left. Bontager's surplus in Michigan. They were well stocked with st...

Built me a Hornet toaster. The darn things want to sting. Now a vacuum to suck them up Vacuum movie - you can hear them hit the fan, one goe...

First night in Devils Lake ND. We didn't get underway until 10 AM and this is a far as we got before nightfall. Construction on US 2 was...

Here is most of our track going from Omaha and back home. Streets and Trips was doing its balky Micro$oft thing and parts of the track are n...

Grabbed a set of G heads off a 1971 Toronado for spares. These had valve rotators. The intake stems were dry so the guides are not completel...

Emily Philbin turns 16 and Sue made up this flag we put up so it could be seen from the highway. Bob Drewes clued me in to the gap that need...

Lifting a head out. Made a fixture that holds the head at the correct angle. Measuring a lifter all the way collapsed to see what the trave...

K line positive seal with protector sleeve on stem and install driver. Basically you just tap it down on the guide. Guide tops had been mach...

I had these seal types to select from. On the exhaust seals the stock type Felpro umbrella are the way to go. The intakes were a different d...

I made a poor man's stem height gage for Oldsmobile heads. The spec is 1.220 + - .005 for the top of the stem above the valve cover rail...

Ground the valve seats in my open sky shop. Intake width .060 exhaust .080. Tried to get the intake pattern towards the outside of the valve...