Statcounter

Saturday, January 6, 2018

Trigger wheel for LS going in Dakota. Tach drive

            Eight space trigger for Dakota tach signal going on the harmonic balancer
 This eight space trigger wheel is used by Dodge on their 5.9's. GM did not do this.
                Plug weld on to the balancer
            There was about .160" clearance from the seal to the balancer. Made the    wheel about .1" thick  for clearance.
                 Puller still fits if needed
          Starting to make the sensor mount, attached to accessory mount.
      Trimmed the Dakota sensor and bolted to new mount. Dakota ECM should be happy with an original sensor.
Wheel and sensor clear all the LS stuff

No comments:

Post a Comment